Handmade Baby or Infant Onesie Part 2

Just a quick post for the second handmade baby onesie I just finished.  This time I chose to use the sleeveless style from the same Mammacandoit pattern found HERE.

I decided to use the same main fabric instead of a woven for the snap area, and I like it much better.  It was a little more difficult to maneuver, but I prefer the way it looks.  It also caused a difficulty when putting the snaps on because it was thicker, but they came out more aligned and more neat than the first onesie.

I wish I had enough matching thread to use in the serger, but I wasn’t about to go buy more just for one project.  Considering it won’t show, the white was fine and more importantly, I didn’t have to change the threads!  

I thought I picked out the same knit material, but I soon realized this one was much thicker and stretchier.  It was a little bit more difficult to work with so I did get some pinching and bunching in some areas.

Loving making these and I hope more of my friends start having babies so I have an excuse to make more!  Next up, I’ll try out the long sleeve style when I pick up more fabric!

Handmade Baby or Infant Onesie

I know I always say it, but I really am so excited and pleased with my most recently finished craft project!  It’s something I’ve wanted to learn for awhile, but I’ve just always seemed to put off.

I absolutely love making baby items because they’re all so cute and tiny, and it’s an excuse to use all of the absolutely adorable fabric prints available!  I was a little disappointed this time though, that when I went shopping for fabric, the selection wasn’t as great as it has been in the past.

I found this cute little dump truck fabric that would work cute for a little baby boy’s onesie.  I believe it was an interlock, which is a nice stretchy knit that is a little thicker than jersey knit.


It’s been sooooo long since I’ve worked with a knit fabric.  I was actually a little intimidated getting started again because it really is different than working with wovens.  It was a perfect excuse to pull out the serger again so that I can get some practice in before the secret project I’m working on.


I don’t believe you always need special equipment to make things, but a serger seriously helps take your handmade items to the next level.  It’s amazing for creating beautifully finished seams like the manufacturers.  I’m such a perfectionist that it’s a MUST if I’m sewing apparel items.

If you’re planning on using a serger for your knits, don’t be intimidated by playing with your machine’s features.  More specifically, the differential feed.  The differential feed refers to how the fabric is fed through the machine.  Knits tend to curl or wave when passed through the machine at the standard machine setting.  For my machine, the standard is 1.0.  By increasing the differential feed to greater than 1.0, it tends to “gather” the fabric as it’s being serged, rather than stretching it.  You will have to check your machine’s manual, and I also recommend doing a test swatch to find the right setting.


Always do a test swatch on a scrap of the fabric you will use.  Below shows the importance of adjusting your serger’s differential feed:

Above: standard differential feed setting vs. increasing the differential feed

I found a pattern on Etsy for the baby onesie that included a wide range of sizes and different sleeve styles.

The link to the mommacandoit shop can be found HERE.

The instructions for the baby onesie were very easy to follow and it finishes up fairly quickly.  I used both my serger and my regular sewing machine, and I think it helps add a more professional finish.  The only thing I wasn’t fond of was using a woven in the crotch area where the snaps are adhered.  I would prefer just using the same knit fabric, or binding the edge like the the neck and legs.

Finish the seam edges with a serger, and use your machine to topstitch for a polished look


It was at this point that I realized I had placed the first set of snaps on wrong!! Luckily, it wasn’t too much of a pain to remove and correct them.

I was a little bummed that after correcting them, I put the second set on crooked.  It’s ok though, I’ll get it right on the next one!


Overall, I loved making this baby onesie!  It is so cute and tiny and can’t wait to give it to the sweet little baby boy.  I’m happy I took the time to learn how to make a onesie, because it will make another great gift to go along with my baby blankets!

Gray and Navy Blue Vinyl Faux Leather Wristlet Zipper Pouch – Finished Object

The very first project I ever sewed was a small coin purse with a metal clasp closure.  I found a nice little kit years ago on Etsy.  It came with a cute little instruction booklet and all of the necessary supplies.  I was immediately hooked!

I’ve since gone on to learn various other sewing projects, including some apparel.  I love the different techniques each different project can teach you.  I’ve recently taken a small pause from making baby blankets, and I’ve been making bags and pouches once again.

I realize now, it’s what I seem to enjoy most.  I think part of the reason is the instant satisfaction.  They are pretty easy to make so they finish up fairly quick.  I also love that it’s an excuse to use all kinds of fun or wacky prints of fabric that I otherwise wouldn’t use for anything.  The amount of supplies needed is also minimal so that’s a huge plus!

This past weekend I was able to finish up a small wristlet zipper pouch.  It gave me a chance to use up some fabrics I’ve had in my stash for awhile.  The finished dimensions are 9″ x 5.25″, with an 11″ strap.  It’s the perfect size for holding a phone, keys, and a few other on the go essentials!

The main body consists of three different fabrics.  The tan fabric is a soft vinyl/faux leather-like material.  The printed fabric is 100% cotton from Quilter’s Showcase, and the dark blue is a home decor weight fabric similar to duck canvas.

I used a regular poly zip that I had on hand.  I didn’t have the exact size needed, but they’re so easy to shorten that’s it’s not worth buying a whole new one.  I like the look of using zipper tabs because it gives a nicer finish than when the side seams are pinched at the ends of the zipper.  I still managed to accidentally pinch the ends of the zipper.  Whomp whomp 😢.  I’m still working on perfecting using zipper tabs so hopefully the next one!


Once again, I used the plain dark red fabric as the lining.  I had a few of these fat quarters on hand, and I don’t have any other solid colors so I’m trying to use them up.  I wanted to attempt making card slots in the lining to add an organizational element.  Sometimes, I hate when you have to just throw everything into a clutch or bag, and you have to sift through it all to find what you need.


Overall, I’m really happy with how it turned out!


DIY Blackout Curtains: Semi-tutorial

With all of the crafting I’ve been doing lately, it feels so strange when I don’t get a chance to work on anything for the week.  In fact, I feel guilty if I don’t get some practice in.  I know I’ve still got a ways to go, so I feel like I should be getting practice in daily.  Between work and personal time, it isn’t always possible, or even practical to craft a lot.  

Last month’s craft to-do list was a little bit long, but I’m happy to say I at least finished a little more than the previous month’s list. I still need to increase the time spent making things, so I know I need to get more control of my scheduling/time management.

One of the things that I enjoy most about crafting is when the finished product is a functional piece to the home, office, or wherever necessary.  After finishing the curtains for my fabric storage shelf, I wanted to finally tackle the blackout curtains I’ve needed.  I originally wanted to make all new curtains, but I decided I’d rather save the money and just repurpose the existing curtains.  It’s also a cheaper option than buying pre-made blackout curtains.

**This process will also work for any lining you want to add to an existing curtain panel, not just blackout lining.

I picked up some Roc-Ion Blackout Lining Fabric from my local Jo-Ann Fabric.  It could technically work as either a main fabric, an attached lining fabric, or a second layer that just hangs behind the main fabric.  I chose to use it as a lining fabric directly attached to the main fabric.  Another benefit to using the existing curtains is that you already know the finished dimensions needed, and the hems are already pressed into the fabric for easy guidelines.

I unfortunately didn’t take any photos of the process because I originally wasn’t going to post about it since I wasn’t really “creating” anything.  I figured it might help someone else out who’s looking to make their own blackout curtains, so I’ll try to write out as many details as possible.  

**Disclaimer:  I’m in no way a professional, and this is certainly not the only way.  It may not even be the best way, but it was easy and worked for me, so hopefully it can help someone else!

1). READY…SET…RIP!

Begin carefully seam ripping all of the existing sewing lines from the manufacturer.  This will give you one large rectangle of fabric (as if you’re starting from scratch).


2). CUT THE BLACKOUT LINING FABRIC:

Length:  Cut about 2″ less than what the FINISHED curtain length will be.  For example: if the finished length from top of the rod pocket to the bottom hem measures 60″, cut the blackout lining to 58″.  This will make sure the raw edges of the lining are encased within the hem while reducing bulk for sewing.  It’s not vital, you could still make it the same length of the main fabric, but it may increase the bulkiness when sewing the hems.

Width:  Cut 1″ less than what the TOTAL width of the main fabric measurement is (the measurement from side edge to side edge after seam ripping).  We’re cutting it shorter to create a self-binding effect that will hide the raw edges and keep the blackout lining from rolling to the front of the curtains.

3). SEW IT UP!

Place fabrics right sides together.  Line up one side seam, pin.  Since we cut the length of blackout fabric shorter, be sure center it in the main fabric so that equal amounts of the main fabric are at the top and bottom.  

Sew side seam only using a 1/2″ seam allowance.  Repeat along the other side seam.  Do not sew top and bottom seams.

4). ALMOST THERE!

Turn fabrics right sides out, press.  You will start to see where the front fabric naturally pulls towards the back, creating a border along the sides.  Pin side seams if desired and topstitch.  Repeat with other side seam.  This creates a really nice, professional finish to the backside of your curtain.


5). HEADING FOR THE FINISH LINE

Now all that remains is to fold down the top to create the rod pocket, and fold up the bottom hem.  Use the manufacturer hem lines as a guide and it will make life so much easier.  When you fold and press the main fabric towards the back, it should cover up the raw edges of the blackout lining.  If for some reason it does not, give yourself more slack in the seam allowance until the lining is covered.  Pin and topstitch in place and you’re done!  Repeat process with any additional curtain panels you may have.


I love that there are no raw edges exposed and that the lining and main fabrics work together as one unit.  

Fabric Organization and Sewing New Curtains

I recently did a major spring cleaning through my craft closet and it feels great!  I let go of some things I wasn’t using and just didn’t really need anymore.  I needed to reorganize some areas so I could actually get to my supplies more easily and use them!

I normally keep all of my fabrics and yarns inside plastic storage bins so they don’t get dust buildup.  The problem with this is that I can’t ever get to the ones I need.  I also end up forgetting what I have on hand.

I decided to make mini bolts of fabric and put them on shelves so I can see everything.  I must say, I’m liking it much better already!


I didn’t want to spend any money because I wasn’t sure at first if I’d like the new way.  I had a package of 8 1/2 x 11 chipboard pieces from scrapbooking days, so I figured they would suffice for now.  All small remnant pieces are just folded for now.  

I don’t want them to get exposed to dust (and mostly Karla’s pet hair!) now that they’re out in the open, so I made some curtains to help keep them dustfree.

I picked up some Keepsake Calico fabric from JoAnn Fabrics.  I think it’s a nice print without being too bright or busy for my taste.


A simple rod pocket style curtain and cheap tension rod did the trick!

Black Vinyl Foldover Clutch Purse Handbag

Super excited for this finished project.  It’s something that’s been on the to-do list for quite some time, but I didn’t really have the supplies to make it the way I wanted.  

Last month sometime, there were some really great fabric sales at JoAnn so I decided to stock up.  

I really wanted to try out working with vinyl because I hadn’t used it before.  I was pleasantly surprised that it wasn’t difficult to work with!

I bought a 1/4 yard of vinyl and I still have enough left to make a few more clutches. The striped fabric is a 54″ home decor fabric.  I also picked up some blue striped print.


For the lining, I had 2 fat quarters on hand that happened to match the striped fabric.  What a perfect coincidence!


I wish my local fabric store carried more colors of the metal zippers. I just picked up a few basic black and brown ones for now.  I almost forgot that I wanted to add a tassel/pull to the zipper.  I think it definitely gives it a finishing touch.

Without vinyl zipper pull:


After:


Overall, I’m super pleased with the results!  As with any project, there are little details throughout that need to be cleaner, but I’m happy with the topstitching, the lining, etc!  Can’t wait to create some more!

Till next time!

Nik

DIY Dog Harness Part 3: St. Patrick’s Day

Happy St. Patrick’s Day!  Karla is celebrating in style with her new shamrock dog harness.  I surprisingly like the green color on her!

I was originally going to use plain black on the backside (which helps make it reversible), but I was lazy and wanted to cut the pieces out all at once.

I want to start finding new parachute buckles to use because the current choice is too bulky looking.  I want to figure out a different pattern so that I can make it adjustable for a better fit.  I’ve been pressed for time though so I just used the same design as her Valentine’s Day Dog Harness.

I made a few adjustments to the fit and shape, but it’s basically the same.  I also used a different batting and I think I like it better than the fusible one from before.  It gives better shape to the harness in my opinion.


Overall, the design and fit (and sewing neatness) still need some work but she’s comfortable and it is fully functional!

Cute Little Dinosaur Boxed Pouch – Sewing Finished Object

So happy when I get to cross things off my to-do list!  I bought this dinosaur print fabric months ago.  I had a few ideas of what I wanted to use it for, but didn’t really decide for certain.

I wanted to make a little boxed bag this month, either for makeup or craft tools.  I normally keep my knitting needles and crochet hooks together, but I don’t really like the way the crochet hooks fit.  I decided this little pouch would be the perfect solution!

My original pouch was so bad!  Well, not at first.  Once I tried to alter it after construction was the mistake.  It was nice and neat but I didn’t plan out the size correctly so it was too short and wide for what I had in mind.  I wish I had more photos.

I decided to try to make it taller and slimmer but that only caused it to be crooked and too tall (photo below)!  The only thing I like about the original version of the pouch was the zipper tabs I used.  I think it gives a nice clean finish:


I realized that when I trimmed the boxed corners, it completely lost its shape and sturdiness, even with interfacing:


Such a disappointment!  I should’ve left it alone!  BUT, I love failures because they’re a learning experience.  I remade the pouch, paying careful attention to what I wanted the finished measurements to be.  I ditched the zipper tab covers, and added actual tabs to ease opening and closing the zipper.  LOVE LOVE LOVE the resulting pouch!

I interfaced both the main and lining fabrics this time for extra durability.


Even though the placement of this tab was slightly off, I don’t care! Lol


I prefer taking the extra time to slip stitch lining seems closed.  It gives a cleaner look than just sewing it closed.


Make sure your directional prints are facing the correct way before you sew!  Also, once you box your corners, don’t trim the excess fabric!  It helps keep the stucture and aid the “boxy” look!



Next time I will definitely choose a coordinating lining thread.  (I was just too lazy to change the bobbin😜):


Can’t wait to make some more of these cute little pouches!

Till next time!

Nik

Crafty t-shirt day at work…

At work, each month is filled with different themed days to participate in. Earlier this week was “crafty t-shirt day.”

I didn’t have many supplies on hand, and I didn’t want to spend money for something I’d only wear for a few hours.  I figured I’d try to make it craft themed, and try to use a few different crafting techniques instead.

I started searching through all of my scraps to see what I could dig up. I found a leftover remnant of some pink polka dot material. I used a paper punch to make a template for the letters, which I then traced onto the fabric.

I didn’t have any stabilizer or wonder under to applique the letters, but surprisingly it didn’t move around/stretch and came out straight!




This also gave me an excuse to use my cricut again 🤗!  I had some red foil iron on.  I think it would’ve looked better if it was a lighter color because it was not enough of a contrast to the black t-shirt.  It made it a little difficult to read the letters but oh well!


I LOVE this font for some reason!   I think it’s super cute and I think the stitched outline is a nice detail.  I made a mini yarn ball with sewing pins to mimic knitting needles, but I ended up leaving it off. 

I’m most pleased that the letter appliqués went on so smoothly and didn’t give me any trouble.

Till next time!

Nik

Follow my Blog on Bloglovin!

Follow my blog with Bloglovin

Just a quick post to link my blog to Bloglovin.  I had heard of the site before but never really knew what it was until I saw this blog post from chronicleofellen.  I like the idea that you can find blogs from different platforms in one spot, as well as tailoring it to your specific interests.  It’s also a good way for people to follow your blog without having to sign up wordpress.

I tend to get overwhelmed by too many social media sites and I try to stick to the minimum because many of them are basically the same features.  I feel like if I update one status, why should there be five other sites to right the same status?  Why can’t we all just have one site like the good ol’ MySpace days?  I think this one is different though because it reminds me more of a reader space for all of the blog pages so I think I will actually put it to good use!

Till next time!

Nik