Handmade Faux Leather Shoulder Bag – Made From an Ardente Design Purse Pattern

Wow!  It’s basically been a month since I last worked on a purse!  So much has been going on that I just haven’t had any time to tackle one.  I’m super excited for this one because it’s the most detailed bag I’ve attempted in quite some time- maybe ever.

It’s also exciting because it’s for my own personal use! My current purse has served me well for a lot of years, but it’s just worn beyond it’s time.  The edges are peeling off, and the straps are falling apart.  I realized I better retire it before it falls apart while I’m out and about.

I normally try to create my items without patterns if I’m able, but sometimes it’s too much of a hassle trying to figure out all of the dimensions and steps.  I found a PDF pattern on Etsy from Ardente Design, so I was able to get started on it right away.

The pattern itself was a little…frustrating.  There are a lot of important details not mentioned and a few differences in lingo that could really confuse a beginner.  Some areas really took me a moment to sort of “decode” what the instructions were trying to say.  The upside is that there are a lot of pictures provided to help.

For the bag, I tried to use as much fabric that I had on hand already.  I used a soft, tan vinyl for the main body, a linen remnant for the main lining, and a plain beige broadcloth.  All fabrics were purchased from Jo-Ann Fabrics.  I was so fortunate to have zippers on hand already as well!


My favorite part of this pattern was making the straps!  I LOVE the technique and I know I’ll definitely incorporate it into future bags.


I wanted to use the black and white linen for the entire lining, but since it was a remnant, there wasn’t enough.  I think the beige fabric ended up giving it an interesting contrast so I’m pleased!

Surprisingly, the part I struggled with the most, was the smaller zipper pocket in the main lining!  I don’t know if I was just too tired, or the linen moved too much, but I had to put it away for the night or else I was going to throw it out the window!!  The next day, I ended up ripping out the stitches and starting again.  It was worth it!


Overall, I love it.  It’s super sturdy with lots of room.  However, I do wish it was slightly smaller.  I wanted a large shoulder bag, but it’s just a little wider than I thought it would be.  Can’t wait to make another one!

Advertisements

Handmade Mini Quilted Suedecloth & Faux Leather Tote Handbag

I hate when I get the urge late at night to start making something because I just know I’ll stay up waaaaay too late working on it.  Of course, that was the case last night.  The result, this mini quilted handbag:


You wouldn’t believe, but this started out as something COMPLETELY different.  I was just sort of “wingin’ it” so it’s no wonder it ended up totally opposite of what I originally had in mind!  I’ve been wanting to do a large shoulder/tote bag out of this material so this made a great miniature mock up.  

This was the first time making handles like these, and it was easier than I thought.  It wasn’t wise however, to attempt sewing them on while being so tired.  What a pain to put on!  It also didn’t help that I had to put them on once the main body of the bag was already constructed (due to my “wingin’ it”).


I can’t wait to make a full size quilted tote, but next time I’ll be more prepared.  It would be super cute to add some rivets, a snap closure, and a pocket inside.

Stay tuned!

Black Vinyl/Faux Leather Bucket Bag

This is one of those projects that seems like it’s on the right path until you get about half way done, and realize you want to throw it across the room.  Even though it came out basically how I envisioned, there are quite a few things that need to be fixed.

I even went back and forth on whether it would just be a shoulder bag…no, a bucket bag…wait, shoulder? No, definitely a bucket bag.  Lol most of this happened because I was too lazy to write and plan out my process before starting.  The whole point is to build prototypes and patterns anyways so it’s not entirely a bad thing.

Overall, I’m happy it worked out and I know I’ll be super pleased once I make the necessary tweaks that will really up the quality of the handbag!


Brown Faux Suede Fringe Clutch Handbag

Stayed up waaaaaay too late last night working on this clutch.  It took me so long just to get motivated to start, but once I did, I couldn’t stop.  The original vision I had in mind was for a crossbody bag, however I didn’t have any matching hardware to make it possible.

This was the first attempt using both faux suede and fringe in a sewing project.  It was surprisingly easy to work with.  I didn’t need any special needle and my regular machine foot worked fine.

The whole basis for the clutch was actually because I wanted to use the Aztec print fabric that I used as the lining.  I LOVE LOVE LOVE it for some reason.  Even the woman at the cutting table was drawn to it and wasn’t sure why.

I love that it is colorful and fun, and stands out so well against the faux suede without being overly bright and loud.


I still have some faux suede left over so I want to play around with it and see what else I can come up with!

Black Vinyl Foldover Clutch Purse Handbag

Super excited for this finished project.  It’s something that’s been on the to-do list for quite some time, but I didn’t really have the supplies to make it the way I wanted.  

Last month sometime, there were some really great fabric sales at JoAnn so I decided to stock up.  

I really wanted to try out working with vinyl because I hadn’t used it before.  I was pleasantly surprised that it wasn’t difficult to work with!

I bought a 1/4 yard of vinyl and I still have enough left to make a few more clutches. The striped fabric is a 54″ home decor fabric.  I also picked up some blue striped print.


For the lining, I had 2 fat quarters on hand that happened to match the striped fabric.  What a perfect coincidence!


I wish my local fabric store carried more colors of the metal zippers. I just picked up a few basic black and brown ones for now.  I almost forgot that I wanted to add a tassel/pull to the zipper.  I think it definitely gives it a finishing touch.

Without vinyl zipper pull:


After:


Overall, I’m super pleased with the results!  As with any project, there are little details throughout that need to be cleaner, but I’m happy with the topstitching, the lining, etc!  Can’t wait to create some more!

Till next time!

Nik

DIY Dog Harness Part 3: St. Patrick’s Day

Happy St. Patrick’s Day!  Karla is celebrating in style with her new shamrock dog harness.  I surprisingly like the green color on her!

I was originally going to use plain black on the backside (which helps make it reversible), but I was lazy and wanted to cut the pieces out all at once.

I want to start finding new parachute buckles to use because the current choice is too bulky looking.  I want to figure out a different pattern so that I can make it adjustable for a better fit.  I’ve been pressed for time though so I just used the same design as her Valentine’s Day Dog Harness.

I made a few adjustments to the fit and shape, but it’s basically the same.  I also used a different batting and I think I like it better than the fusible one from before.  It gives better shape to the harness in my opinion.


Overall, the design and fit (and sewing neatness) still need some work but she’s comfortable and it is fully functional!

Cute Little Dinosaur Boxed Pouch – Sewing Finished Object

So happy when I get to cross things off my to-do list!  I bought this dinosaur print fabric months ago.  I had a few ideas of what I wanted to use it for, but didn’t really decide for certain.

I wanted to make a little boxed bag this month, either for makeup or craft tools.  I normally keep my knitting needles and crochet hooks together, but I don’t really like the way the crochet hooks fit.  I decided this little pouch would be the perfect solution!

My original pouch was so bad!  Well, not at first.  Once I tried to alter it after construction was the mistake.  It was nice and neat but I didn’t plan out the size correctly so it was too short and wide for what I had in mind.  I wish I had more photos.

I decided to try to make it taller and slimmer but that only caused it to be crooked and too tall (photo below)!  The only thing I like about the original version of the pouch was the zipper tabs I used.  I think it gives a nice clean finish:


I realized that when I trimmed the boxed corners, it completely lost its shape and sturdiness, even with interfacing:


Such a disappointment!  I should’ve left it alone!  BUT, I love failures because they’re a learning experience.  I remade the pouch, paying careful attention to what I wanted the finished measurements to be.  I ditched the zipper tab covers, and added actual tabs to ease opening and closing the zipper.  LOVE LOVE LOVE the resulting pouch!

I interfaced both the main and lining fabrics this time for extra durability.


Even though the placement of this tab was slightly off, I don’t care! Lol


I prefer taking the extra time to slip stitch lining seems closed.  It gives a cleaner look than just sewing it closed.


Make sure your directional prints are facing the correct way before you sew!  Also, once you box your corners, don’t trim the excess fabric!  It helps keep the stucture and aid the “boxy” look!



Next time I will definitely choose a coordinating lining thread.  (I was just too lazy to change the bobbinūüėú):


Can’t wait to make some more of these cute little pouches!

Till next time!

Nik

Blue Minky Baby Blanket with Satin Blanket Binding (FO) semi-tutorial

Okay, so I promise this is going to be the last baby blanket for a little while!  I love making them and they’re so quick to finish, but I don’t want to keep boring you with the same style.  This one was for another baby boy that graced the world with his presence this past weekend.  I love this super cute patchwork fabric, that consists of minky and flannel squares.  I hadn’t used minky until the Woodland Creatures Minky Baby Blanket with Satin Blanket Binding so I’ve been on a mini obsession with it.  I loved the dark blue minky for the backing fabric!  I again decided to use the satin blanket binding because I love the nice detail and more professional look it gives.

I like baby blankets somewhere in the 30-40″ range on average so I cut my pieces down to a 31″ x 31″.


Before cutting out the main fabric, I wanted to straighten/even out the edge to make sure my measurements were accurate.  I lined up my straight edge along the first seam line and used my rotary blade.

Pin your fabrics, WRONG SIDES TOGETHER.  This is because you won’t be hiding the seams inside.  Instead, baste or regular stitch all around the edges using your desired seam allowance.


I used a 1/4″ seam allowance so that the blanket binding will be wide enough to cover the sewing line.

For the binding, one package of pre-measured binding will be more than enough for my 31″x31″ blanket.  It comes with 4.75 yards in a package.  Be sure to figure out the perimeter of your blanket to ensure you purchase enough. 

Next, begin placing the binding around the edge.  Be sure not to start too close to the corner because you will need room to overlap the edges.
You’ll notice that one side of the binding is just a bit wider than the other.  Be sure that this wider side goes on the backside of your blanket.

Open the binding (iron if desired), and sandwich your fabrics between the binding and pin if desired:

Yes, those are bobby pins I’m using to avoid snagging the binding:

Set your machine to a zig zag stitch and guide the binding so the the stitches straddle the edge of the binding.  This will make sure that the edge on the backside is caught in the seam as well.

I wish I had pictures for the remaining, but I was so frustrated that I forgot to take them as I was finishing today.

For the corners:  continue sewing until you reach the end of the fabric.  Turn the fabric in the direction of the next side you will be sewing.  Be sure the edge of the blanket is flush inside the crease of the binding:

Fold the corners inward at a 45 degree angle to get the nice mitered corner.  The binding edges should meet at a 90 degree angle if done correctly.  Be sure to sew over the edge to keep it in place. It can be tricky to catch the backside, and for me I usually have to do a second row of stitches in order to catch the back seam.

Finishing: If you have extra binding remaining, trim leaving enough to overlap the starting point.  I like to leave enough so that I can fold the edges inward to create a point (similar to the angle created when joining bias strips).  Sew in place as you did for the corners and you’re all set!



For some reason, this specific blanket was the most stressful thing I’ve ever made!  There were so many moments I wanted to throw it across the room!  I think if I had to seam rip one more time, I would’ve broken down in tears (literally).  Everything was going great until it was time to add the binding.  No matter what I did, I just could not seem to get my corners turned and mitered nicely.  Once I got past a corner and continued down the side, the binding would shift and the threads wouldn’t catch the back of the binding!  I don’t know if I was just overly tired or what, but I realized it was time to walk away and come back to it later.
Although I love the look of the blanket binding, I don’t think I’ll continue to use it quite as often.  Overall, I’m happy I decided to try it out for these last couple of blankets.

WIP Wednesday: Do you have multiple WIP’s?

Like most crafters, I have a couple of projects going on simultaneously. ¬†Sometimes it’s from the boredom of working the same item hour after hour, sometimes creative block forces you to take a break, or if you’re like me, you just have so many different things you want to tackle all at once!

Another reason that I’ve noticed is as simple as giving my body a break. ¬†Working a craft such as knitting for example, tends to use the same muscles constantly, and for each project. ¬†I feel that when I’m starting to feel too tense or tired, switching gears to a different medium helps by engaging different muscles and creative visions. ¬†Anyone else feel the same way?

As of right now, I’ve just been posting finished objects (FO). ¬†I enjoy seeing all of the work in progress (WIP) posts from other bloggers, so I thought maybe I should join the fun. ¬†It’s cool to see the progress from week to week, and give people a sneak peak of what you’re working on. ¬†Many times I tend to finish projects quickly, so this may only happen whenever I’m working on a knitting or crocheting project since those usually take me longe
r.

This week’s WIP is a knitting¬†project, specifically a beanie. ¬†I’m trying out a sock yarn for the first time and man is is time consuming! ¬†I’img_2687ve never used needles smaller than a size 4 and this yarn requires size 2! ¬†I feel like it takes forever to finish a row. ¬†I’m working it flat instead of in the round because I wanted to use a tubular cast on. ¬†The thought of trying to work the foundation rows in the round with that many stitches made me cringe. ¬†It’s hard to see the stitches because they’re so small, but I LOVE the clean stretchy edge of a tubular cast on. It’s so great for beanies.


 

 

 

I tried to adjust the picture to show the stitch detail, but it ended up altering the color. ¬†I’m using Deborah Norville Serenity Sock Weight in the color Black. ¬†Since this is the first time testing out this yarn, I think it’s a little too fine for this project. ¬†I think if I were to double up and use two skeins at once, it may have given a more desired thickness. ¬†I’ll just stick with it as is since I’m too lazy to redo the tubular cast on, and I’ll try it as a small swatch before beginning again.

 

DIY Tote Bag using the Cricut Explore Air

Finally had some free time to unbox and play around with my new Cricut Explore Air! ¬†It was killing me to hold onto this exciting new toy and not be able to try it out. ¬†So after work last night, I forced myself to make some time for it. ¬†I originally just planned on setting it up, downloading the software and such, but let’s be real. There’s no way I could not try it out! ¬†I mean, isn’t the first cut the most thrilling part??

I absolutely love how easy the machine and software are to use. ¬†I have always been so intimidated by Cricut’s features, but the Explore Air is seriously the most user friendly device. ¬†The design space is so easy to navigate and takes just a moment to get the hang of. ¬†One of the most exciting features is the Bluetooth connection (which was so handy since my computer decided to crash the night before ūüėę). ¬†With the Explore Air, you get full customization just as easily from an iPhone or iPad!

I purchased one of the Cricut Iron-on rolls when I originally got the machine so I figured that would be the most fun to try out.  I bought a plain black tote from JoAnn Fabrics and decided I wanted a quote or something related to crafting or motivation towards self-employment.  I found a pre-designed image in the catalog and started to customize it.

I was super excited to get going until half way through the cut I realized I had the iron on sheet the wrong way on the mat!  I wasted more than half of the roll in doing so!
I remembered to mirror the image, but you can see here that I accidentally cut on the plastic transfer portion rather than on the back of the iron on portion!  I was able to at least save as much uncut space as possible to use for future projects.
I figured I still had enough of the iron on to make a smaller version of the logo. ¬†I couldn’t fit the bottom banner portion without making the entire logo smaller so I decided to forego it so that it wouldn’t be too miniature. ¬†I was so terrified that I was going to tear the image because some lines were so thin! ¬†I was pleasantly surprised that it was easy and durable! ¬†Since I don’t have any extra Cricut tools, I used a regular sewing pin to pick all the tiny little pieces out from the inside of the letters. ¬†It seems to work just as well, so until otherwise, I’ll choose to save my money by not purchasing any unnecessary extras!

Overall, I’m super pleased with the result, and I can’t wait to make more stuff!! I love my new machine and I’m looking forward to the positive impact it’ll have on my business venture!

**UPDATE: ¬†After looking at the first sheet of iron on, I realized it didn’t actually cut through the plastic and into material. ¬†I can still go ahead and reuse for another project!! Super excited that it didn’t end up as wasted money/supplies!